PRINTED, BOUND AND MAILED TO YOU,
SEE THIS OUTSIDE COMPANY'S OFFER >>>
Back to my main camera information page
This STX-1n is basically the same as
the STX-1 but has an LED meter lights
rather then the delicate needle meter.
See below for instruction on
using and checking the battery
with the LED (STX-1N) model
CLICK HERE FOR English
FUJICA STX-1n PDF VERSION
- Better printing
Fujica STX-1 Gebrauchsanieitung
Fujica STX-1 Mode d'emploi
Fujica STX-1 Manual de instrucciones
This STX-1N
model has LED lights instead of meter
CLICK HERE FOR INSTRUCTIONS
CONTENTS
|
Part 1, Fundamentals Special Features 1. Basic Steps. 2. Battery Insertion . . . 3. Film Loading . 4. Setting the Film Speed. . 5. Setting the Shutter Speed . 6. Focus the Lens and Frame Your Picture 7. Correct Exposure . 8. Holding the Camera and Releasing the Shutter ... .... 9. Rewinding Film and Unloading Film |
Part 2, Advanced Techniques 1 Changing the Lens .. .... 2. Exposure Correction : . . . 3. Utilizing the Lens Depth of Field 4. Using the Self Timer. ... 5. Infrared Photography 6. Taking flash pictures 7. Accessories for the FUJICA STX-1n 8. Care and Storage of your FUJICA STX-1n 9. Specifications |
Names and functions of the parts
1. Film Advance Lever
2. Shutter Speed Selector Dial/ASA film speed selector
3. Film ASA Speed Window
4. Shutter Release Button provided with socket for
5. Frame Counter (Additive type automatically resets)
6. Shutter Speed Mark (red dot)
7. Shutter Release. Lock
8. Neck strap Eyelet
9. Self-timer Start Button.
10. Self-timer Set Lever (The shutter is activated in 8 - 10seconds)
11. Depth of Field Preview Button
12. Taking Lens
13. Accessory (hot) Shoe
14. Hot Shoe for X Contact
15. Combination Rewind Crank/Camera Back Lock
16. Battery Chamber / Insert two alkaline-manganese batteries (LR44) for powering the camera's electric Metering system (mercury batteries (HR44) or silver-oxide batteries (SR44) can also be used)
17. Lens Mount
18. Aperture Selector Ring
19. Aperture / Distance Mark
20. Depth of Field Indicator
21. Distance Scale
22. Focusing Ring
23. Lens Safety Lock
24. Film Rewind Spindle
25. Film Rail
26. Guide Rail (the film is passed over the film rail and the edges go between the Guide Rail)
27. Viewfinder Eyepiece designed for attaching the Eye Cup. etc.
28. Battery Chamber / Insert two
alkaline-manganese batteries (LR44) for powering the camera's electric
Metering system (mercury
batteries (HR44) or silver-oxide batteries (SR44) can also be used).
29. Sprocket Wheel ( The film perforations are engaged with the sprocket teeth to advance the film. )
30. Take-up Spool
31. Pressure Plate
32. Camera Back
33. Film Chamber
34. Tripod Socket
35. Film Rewind Button
SPECIAL FEATURES
1. Improved Through-The-Lens Exposure Meter
The exposure meter of the FUJICA STX-1n consists
of 2 Silicon photocell light receptors located on either side of the viewfinder
eyepiece. which are connected to an FET (Field Effect Transistor) circuit and
are coupled with the shutter and diaphragm. It measures the average light
intensity which falls on the entire surface of the focusing glass In other
words, it measures the light that has passed through the lens and will actually
reach the film.
| Special features of this camera are: the new Fujica X bayonet mount which permits quick interchanging of the lenses, a full aperture metering system. and three-way focusing with split image, microprism and ground glass It is also provided with a shutter speed indicator scale in the viewfinder to enable you to set the shutter speed while looking through the viewfinder |
2. World Renowned X-FUJINON Lens
The interchangeable lenses of the FUJICA STX-1n
are widely known for their superb color definition and perfect corner-to-corner
picture sharpness and clarity.
3. A Complete Camera System in Itself
A wide range of interchangeable lenses,
accessories. and its Improved TTL full-aperture exposure meter make the FUJICA
STX-1n
a complete camera system in itself capable of
handling any picture-taking situation and subject.
BASIC STEPS
1. Load the Film
Pull the Combination Film Rewind Crank/Back Cover Lock fully until the Camera Back automatically snaps open Next, load the 35mm film cartridge into the Film Chamber and insert the film into the slot of the Take-up Spool.
2. Set the Film Speed
To set the camera for the speed of the film you are using, pull up the top of the Shutter Speed Selector Dial and turn it until the number you want appears in the center of the ASA Film Speed Indicator Window
3. Set the Frame Counter to 1 (the first white dot before the number 2)
The odd numbers of the frame counter are represented by white dots. Wind the Film Advance Lever and press the Shutter Release Button Do this twice. and on the 3rd winding. the first white dot on the film counter (frame No 1 ) will move opposite the triangular mark.
4. Set the Shutter Speed Selector Dial
Turn the Shutter Speed Selector Dial to the speed desired If you are shooting outdoors. the shutter speed will be either 1/125 sec or 1/250 see If you are shooting indoors it will be 1/30 sec or 1/60 sec The shutter speed can also be set with the shutter speed scale and green indicator needle in the viewfinder (left side edge) The needle is set by turning the Shutter Speed Selector
5. Focus the Lens and Frame Your Picture
(1) Look through the Viewfinder Eyepiece and turn the Focusing Ring to focus and frame your picture
(2) To focus turn the focusing ring to make the upper and lower segments of the split image in the microprism center spot converge and form a perfect fit
6. Set the exposure
To set the camera for correct exposure, press the Shutter Release Button halfway down. Look through the Viewfinder and, while watching the exposure meter needle, turn the Aperture Selector Ring to bring the needle into the center of the indentation
7. Press the Shutter Release Button
Hold camera steady to prevent shake and gently press the Shutter Release Button
8. Rewind the Film
After you have exposed the entire roll of film, press the Film Rewind Button, erect the Film Rewind Crank. and turn it in the direction pointed by the arrow and wind the film back into the cartridge, until you feel tension released Next, lift the Back Cover Lock fully up until the camera back snaps open Now, remove the cartridge.
BATTERY INSERTION
1. Open the Cover
Open the Battery Chamber Cover (16) by sliding it in the direction of the arrow.
2. Load the Batteries
Insert two alkaline-manganese batteries. One on top of the other into the Battery Chamber with the plus sides (+) facing outward and close the cover
· If you are buying new batteries. be sure to specify
LR44-type alkaline-manganese batteries. HR44-type mercury batteries (extremely
hard to find - not worth it). or SR44-type silver oxide batteries.
3. Check the batteries
(1 ) Set the ISO/ASA Speed Selector (2) to 100,
the Shutter Speed Selector (2) to 60, and the Aperture Selector (18) to the
maximum aperture (F1.9)
(2) While pressing the Shutter Release Button (4)
halfway down, look through the viewfinder and point the camera toward bright
light (fluorescent light, etc.)
(3) If the LED in the viewfinder moves from the
plus side down to the minus side when the camera is faced toward dim light
(you can block out the light with your hand), the batteries are loaded
properly
(4) If the LED remains stationary on the plus side
or minus side when the camera is faced from bright to dim light. the batteries
are either exhausted or improperly loaded and have to be changed or reloaded
properly
Precautions: If you are not taking
pictures immediately, lock the shutter release button to prevent tripping the
shutter or draining the batteries Inadvertently
* The alkaline-manganese batteries will normally
last about 8 months, and mercury or silver-oxide batteries about 1 year
* If you are not using the camera for a long
while, remove the batteries and keep them where it is dry
* Be sure to wipe both ends of the batteries clean
with a piece of cloth before loading. Poor contact may result if the ends are
unclean
1. Open the Camera Back
Lift the Combination Film Rewind Crank - Camera
Back Lock ~ fully up until the Camera Back ~ automatically snaps open.
2. Load the Film
Insert the cartridge into the Film Chamber ~ with
the spool head (projection) pointing to the bottom of the camera. push down the
Combination Film Rewind Crank - Camera Back Lock ~ to engage the Film Rewind
Spindle ~ with the film spool Pull out the trimmed end of the film and insert it
down to the bottom end into the slot of the Take-up Spool by
3. Close the Camera Back
Wind the film a little with the Film Advance Lever
Expand engage the perforations on both edges of the film with the sprocket teeth
Be sure the film is properly inserted between the Guide Rail ~ Now, press down
the Camera Back until it closes tightly with a click
* it means the film has been loaded properly,
* The odd numbers of the Film Counter (hi) are
represented by white dots
* To allow you to take quick shots in succession,
the Film Advance Lever (A will be back with a slight latitude Press it all the
way back after you have finished shooting
SETTING THE FILM SPEED
Lift the top of the Shutter Speed Selector Dial
(2) and turn it to the left or right until the film speed number you want
appears in the center of the ASA Film Speed Indicator Window (3)
The film speed is printed on the film box.
(FUJICOLOR Film FUJICHROME 100 and NEOPAN SS are ASA 100 films FUJICHROME 400
FUJICOLOR 400 and NEOPAN 400 are ASA 400 films )
The calibrations between the ASA numbers represent
the following numbers: ( I )
· If you are using a film marked for DIN speed
refer to the following conversion table (11)
SETTING THE SHUTTER SPEED
The letter B and the numbers 2... 700 on the
Shutter Speed Selector Dial represent ''bulb'' and 1/2 . ., 1/700 second They
indicate the length of time the film will be exposed to light. The shutter speed
scale is also visible in the viewfinder (left side edge).
This camera allows you to set exposure either by
the shutter speed or by the size of the lens opening However, it is best to set
the shutter speed first. For example, the shutter speed would be from 1/125 to
1/250 sec if you are shooting outdoors, or from 1/30 sec to 1/60 sec . if you
are shooting indoors To set the shutter speed, first turn the Shutter Speed
Selector Dial while pressing down on it slightly and set the number you want
opposite the red dot on the camera body. To set the shutter speed with the scale
and needle in the viewfinder. just move the needle into position by turning the
Shutter Speed Selector.
* Use B (bulb) if the exposure will take
l second or longer.
* There are no intermediate settings between the
numbers indicated on the dial.
* 60 is marked with a red X to remind you that it
IS the speed used for shooting with electronic flash.
FOCUS THE LENS AND FRAME YOUR
PICTURE
1. Focus the Lens
(1 ) Look through the Viewfinder and point the
camera so that the main subject is seen through the small microprism center
spot.
(2) Split-image Focusing
Turn the Focusing Ring (22) until the upper and
lower segments of the split image in the microprism center spot converge to form
a single image
(3) Microprism Focusing
Turn the Focusing Ring until the image in the
microprism center spot appears sharp
(4) You can also focus with any part of the area
surrounding the microprism center spot This method is especially useful when
shooting with aperture stopped far down
(5) The white numbers on the Focusing Ring are for
meters and the green numbers are for feet The distance can also be set by visual
judgment for quick shooting
When shooting extreme close-ups the distance from
subject to Film Plane Mark (16) must be precisely measured with a tape measure
2. Frame Your Picture
The Viewfinder will let you see 92% of the entire
View that will register on your film so that you can go ahead and use the whole
length and width of the area in the Viewfinder to frame your picture
* Eyesight Adjustment Lens
The Viewfinder is provided with an eyepiece for
those with normal vision. If you are near sighted or far sighted, be sure to use
an Eyesight Adjustment Lens, otherwise it will be extremely difficult for you to
focus the lens precisely. Four different Eyesight Adjustment Lenses are supplied
as optional accessories: +2, +0.5, - 2.5 and ~4 dioptor.
CORRECT EXPOSURE
1. Press the Shutter Release Button halfway down
Point the camera at your subject while looking through the Viewfinder and
press the Shutter Release
2. Turn the Aperture Selector Ring
While pressing the Shutter Release Button halfway down, turn the Aperture
Selector Ring (18) until the LED in the viewfinder moves into the center of the
Exposure Indicator. You now have the correct exposure.
3. If the LED Does Not Turn on in the Center . . .
If the LED does not move into the center of the Exposure Indicator by turning
the Aperture Selector Ring, you will have to change the shutter speed
· If the LED lights on the (+) side, increase the shutter speed
(Example: If the shutter speed is 1/125 see, turn the dial to 1/250 sec.)
· If the LED lights on the ( - ) side, reduce the shutter speed. (Example: If
the shutter speed is 1/125 see, reduce it to 1/60 sec ).
Since the light that is measured is the average light intensity falling on
the focusing glass, the range of measurement must differ depending on the speeds
of the lens and film A noteworthy feature of this exposure meter is that it
covers a wide range of exposure values If you are shooting with FUJICOLOR HR100
(ISO/ASA 100) film using an F1 4 lens, for example, the range covered would be
EV2~EV17-2/3 (f /1.4 1/2 sec of /16 1/700 sec ). If the lens is 50mm F1 9, the
range is from EV3~EV17-2/3 (f/1.9 1/2 sec ~f/16 1/700 sec.):
The chart on page 56 shows the light measuring range of the FUJICA STX-lN's
exposure meter The Shutter Speed Selector Dial can be set over every ISO/ASA
speed and shutter speed combination on the dial. but the exposure meter will
operate only within the range shown in the chart
Note: The aperture can also be set intermediately between the
calibrations on the scale to permit fine adjustments.
HOLDING THE CAMERA AND
RELEASING THE SHUTTER
1. Hold the Camera Steady
If you don't hold the camera steady. your pictures
will not turn out sharp because the camera will shake Be sure to hold yourself
in good balance with elbows close against your body and the camera pressed
lightly against your face. This is all the more necessary if you are shooting
with the camera held vertically. Practice a little and get used to these
motions.
2. Press Down the Shutter Release Button
Be sure to press down the Shutter Release Button
(hi) gently Any jerky motion can cause the camera to shake and pictures to be
unsharp.
3. When To Use a Tripod
If you are taking a close-up. telephoto shot, or
if you are shooting at a shutter speed slower than 1/30 sec., be sure to use a
tripod and cable release to avoid camera shake
A cable release is also recommended for shooting
long-exposure shots with the camera placed on a table, against a tree. or on
some other steady foundation. A cable release with a stopper attachment is a
very convenient item for shooting with the camera set at B (bulb) You can press
open the shutter. hold it in that position with the stopper for as long as you
want, then release the stopper to close the shutter
REWINDING FILM AND UNLOADING
FILM
After you have finished a roll of film, rewind it
back into the cartridge and take it out of the camera
1. Press the Film Rewind Button
First, press down the Film Rewind Button (35)
located on the underside of the camera Once you have pressed down this button,
you can let it go because it will stay depressed The Sprocket Wheels (29) are
now free
2. Turn the Film Rewind Crank
Erect the Film Rewind Crank (15) and wind it in
the direction of the arrow to return the exposed film back into the cartridge.
Just before the end of the film is reached, you will feel a slight tension
released on the crane Give it 2 more turns and the film Is wound back into the
cartridge
3. Open the Camera Back
Be sure to load and unload the cartridge in the
shade and away from direct sunlight by all means If the end of the film is
reached when you have wound the Film Advance Lever half-way around. do not force
it because the film might break Simply press the Film Rewind Button and wind the
Film Advance Lever all the way back The shutter will be wound, but the film will
remain stationary Since you have already pressed the Film Rewind Button all you
need do is turn the Film Rewind Crank.
CHANGING THE LENS
A complete range of highly color-compatible. high
resolution X-FUJINON interchangeable lenses are available for shooting scenic,.
portraits, snap-shots, news photos, and photo records with the FUJICA STX-1n
1. Mounting
Fit the Lens into the camera's Lens Mount (17) so
that the red dot on the Lens' mounting end comes opposite the red dot on the
Lens Mount (19) then turn the lens about 65 to the right (clockwise). Ii will
lock itself with a click.
You can also use the Aperture/Distance Mark on the
lens barrel as your guide because it is located on the same line as the red dot
on the Lens' mounting end
2. Dismounting
While pressing in the Lens Lock (23) toward the
camera body. turn the lens to the left (counterclockwise) as far as it will go,
then pull it out toward the front
* When changing the lens, be careful not
to touch the lens glass or the mirror in the body with your fingers. COUPLING RANGE OF THE FUJICA
STX-1n'S EXPOSURE METER
The ASA film speed and shutter speed are coupled
over the range shown In the chart on the next page. To measure the exposure you
can use the entire range of apertures provided on the lens you are using
Example: With the ASA speed selector set to 100
you can use a shutter speed of from 1/2 to 1/700 sec. The aperture will
automatically be coupled to the shutter speed being used
EXPOSURE CORRECTION
Any normal subject can be accurately exposed by
following the meter reading. However, best results are obtained under the
following situations by correcting the exposure.
1. Back lighted Subjects, etc.
Back lighted subjects or ski scenes, which are dominated by
white areas and strong reflections, will turn out with the main subject
underexposed. By opening the aperture by 1/2 or 1 full stop. or by approaching
the main subject to measure the light intensity, it can be correctly exposed
2. Spot-lighted Subjects. etc.
A person standing before a black background or a
spot-lighted subject in a stage play will be influenced by the dark surroundings
and turn out overexposed. The aperture should be stopped down by 1/2 or 1 full
stop below that indicated by the meter.
3. Copying Documents
The major portion of most documents are occupied
by white areas. The situation calls for opening the aperture by 1 full stop from
that indicated by the meter.
If you want to be more precise. place an 18%
standard reflectance card in front of the camera and set the exposure with the
exposure meter
For maximum corner-to-corner sharpness. the
minimum practical aperture should be used for copying work and for taking
close-ups.
4. Taking Advantage of the Eye Cup
With the aperture stopped well down, the light
reflected from your eye or spectacles (if you are wearing them) will reach the
focusing glass and slightly influence the meter reading. To avoid this, use an
Eye Cup over the Viewfinder eyepiece
USING THE MOUNT ADAPTER X-S
If you want to use your Praktica screw-mount
Fujinon lenses on the Fujica STX-1n use the Fujica Mount Adapter X-S (optional
accessory).
(1) Screw the Mount Adapter X-S on the lens rear
(2) Place the red dot on the adapter s rear end
against the red dot on the camera s Lens Mount (17) and turn the lens 65 to the
right (clockwise). It will lock into position with a click.
(3) While looking through the viewfinder press in
the Depth of Field Preview Button (11), hold it there and press the Shutter
Release Button halfway down Then turn the Aperture Ring until the LCD in the
viewfinder moves into the center of the indentation.
(4) Focus the lens. compose your picture and
squeeze the Shutter Release Button gently down.
UTILIZING THE LENS DEPTH OF
FIELD
1. What is meant by Depth of Field
To check the effects of the aperture you have
selected —how well you have blurred out the background or how wide the depth of
sharpness is - all you have to do is to look through the viewfinder, because the
aperture will close down to the size you have selected as you press In the Depth
of Field Preview Button
Thus. the sharpness of a picture extends over a
considerable range both in front of and behind the point the lens is focused on
This zone of sharpness is referred to as the depth of field The width of the
depth of field differs depending on the lens focal length, subject distance, and
lens aperture
(2) The longer the focal length of the lens, the
narrower the depth of field, and the shorter it is the wider it becomes.
(3) The farther the distance the lens is focused
on, the wider the depth of held.
(4) The zone of sharpness in front of the point of
sharpest focus is narrower than the zone of sharpness behind the same point.
(5) Example A shows the aperture fully open.
Example B shows the aperture stopped down
to f/1 6.
All the interchangeable lenses of the FUJICA
STX-1n are provided with a depth of field indicator on the lens barrel. For
example. if you are using an F2 2 55 mm normal lens and have set the aperture at
f/8 and the distance at 15 feet (5 m), everything from about 11.5 feet (3.5 m)
to 28.5 feet (8.7 m) will be in sharp focus.
USING THE SELF TIMER
If you are taking pictures of a group or if you
are shooting a family souvenir picture and want to get into the picture
yourself, just use the self-timer First, mount the camera on a tripod, wind the
film and push the Self-timer Set Lever all the way down, Next, press the
Self-timer Start Button and move back into the picture The shutter will be
automatically released in 8 - 10 seconds.
* Don't press the Shutter Release Button
''instead'' of the Self-timer Start Button, because you will release the shutter
if you do
* Make sure the Self-timer Lever is pushed all the
way down (never part-way down) before depressing the Start Button
To take infrared pictures with infrared
film in your camera, the Lens is focused on a point slightly short of your
subject. The procedure is as follows:
1. Focus the lens on your subject.
2. Check the distance given on the
Distance Ring and move that distance opposite the Infrared Setting Mark. Next,
put a red filter on the Lens and shoot. (The Infrared Setting Mark is the small
red dot located next to the Lens Setting Mark. )
* Read the instruction sheet packed with
your infrared film carefully because exposure is not determined by subject
brightness.
TAKING FLASH PICTURES
You can use a flash for shooting indoors and night
pictures as well as for supplementary lighting in outdoor photography To take
flash pictures. use a cordless hot-shoe type electronic flash Just clip it Into
the camera s Hot Shoe (13) and set the Shutter Speed Selector (18) to 1/60 sec
(marked with a red X on the Shutter Speed Scale)
* Setting the aperture
(1 ) If you are using an automatic electronic
flash. set the Aperture Selector (18) to the specified aperture and the flash
will take care of the rest
(2) If you are using an ordinary electronic flash.
just divide the guide number of your flash by the distance from flash to subject
to find the correct aperture
ACCESSORIES FOR THE FUJICA
STX-1n
(1) Fujica STX-1n
ACCESSORIES FOR CLOSE-UPS AND
COPYING
The single-lens reflex camera is the ideal
equipment for taking close-up pictures and for copying work. You are assured of
simplicity and accuracy with the accessories provided for these purposes
* Close-up Lens (20)
If you are shooting a subject that it closer than
the shortest shooting distance of the camera lens, just screw in the Close-up
Lens in front of the taking lens. With a normal lens in place, it will let you
shoot your subject from as close as 11 inches (28cm) up to 19 7 inches (50cm) ·
Extension Tube X (13) (14)
* Extension Bellows X (8)
This unit will let you freely adjust the distance
between lens and film plane It is a prime accessory for taking close-ups and
high magnification shots of small objects at close distances
* Reverse Adapter X (19)
This accessory is used for mounting the reverse
end of the lens to the Extension Bellows unit to simplify focusing when taking
pictures of subjects 78 magnified to larger than life size.
* Microscope Adapter X (11)
This is used in photomicrography for attaching the
camera body to the microscope eyepiece
* Right Angle Finder (15)
This is attached to the Viewfinder Eyepiece to
simplify viewing through the finder when the camera is aimed from a low position
or when it is mounted on a copying stand The eyesight adjustment lens is built
in.
* Macrocinecopy X (10)
This accessory is used for making film
reproductions of 8 and 16mm films and microscope slides with the FUJICA STX-1n.
EXPAND THE VERSATILITY OF YOUR FUJICA STX-1n WITH
PROPER ACCESSORIES
FILM LOADING
* If the Film Rewind Crank turns in the
opposite direction of the arrow as you wind the Film Advance Lever
4. Set the Frame Counter (5) to 1 (the first
white dot before the number 2) Wind the Film Advance Lever (1) all the way to
the right and press the Shutter Release Button (4) Do this twice, and on the
third winding. the first white dot before the number 2 will move opposite the
triangular mark You are now ready to take the first picture
Excepting l /700 second, each shutter speed is
either l /2 or 2 times the speed of the shutter speed next to it
Button (4) halfway down. You will see an LED turn on in the Viewfinder right
side
9
4. Wide Measuring Range
If the film cannot be rewound (this will
sometimes happen if the Film Advance Lever is not in the correct position). just
depress the Rewind Button and, while holding it down. wind the Film Advance
Lever all the way through Next, release the Rewind Button and rewind the film.
Lift the Combination Film Rewind Crank - Camera
Back Lock (15) until the Camera Back (32) opens with a snap. Now take out the
cartridge and send it to the processor - the sooner the better.
ASA
Shutter speed that link with the meter
25
1/2 sec to 1/700
32
1/2 sec to 1/700
40
1/2 sec to 1/700
50
1/2 sec to 1/700
64
1/2 sec to 1/700
80
1/2 sec to 1/700
100
1/2 sec to 1/700
125
1/2 sec to 1/700
160
1/2 sec to 1/700
200
1/2 sec to 1/700
400
1/2 sec to 1/700
800
1/4 sec to 1/700
1600
1/8 sec to 1/700
3200
1/15 sec to 1/700
(1) The higher the aperture number (the
smaller the aperture), the wider the depth of field The lower the aperture
number, the narrower it becomes.
EXAMPLE A
EXAMPLE B
2. How to see the Depth of Field
* You can set the self-timer first. then
wind the film afterwards, whichever way you prefer.
INFRARED PHOTOGRAPHY
(2) Fujica Auto Strobe AZ
(3) Fujica Auto Strobe 300X
(4) Camera Case STX-1n
(5) Gadget Bag L
(6) Gadget Bag S
(7) Fujica Slide Copier X
(8) Fujica Auto Bellows X
(9) Fujica Focusing Rail X
(10) Fujica Macrocinecopy X
(11) Fujica Microscope Adapter X
(12) Fujica Teleconverter 2X
(13) Fujica Auto Extension Tube X25
(14) Fujica Auto Extension Tube X50
(15) Fujica Right-Angle Finder
(16) Fujica Eye Cup
(17) Fujica Rubber Lens Hood
(18) Fujica Mount Adapter X-S
(19) Fujica Reverse Adapter X
(20) Fujica Close-up Lens
(21) Fujica Filter CROSS-4
(22) Fujica Filter MULTI-5
(23) Fujica Eyesight Adjustment Lens +2
(24) Fujica Eyesight Adjustment Lens +0 5
(25) Fujica Eyesight Adjustment Lens -2 5
(26) Fujica Eyesight Adjustment Lens -4
(27) Fujica Filter Skylight(1B)
(28) Fujica Filter SO 56
(29) Fujica Filter SR 60
(30) Fujica Filter SY 48
(31) Fujica Filter FL-W
(32) Fujica Filter LBA-12
(33) Fujica Filter LBB-12
(34) Fujica Filter ND-4
(35) Fujica Filter PL
(36) Fujica Filter UV
(37) X-FUJINON 1:2 2 f=55mm
(38) EBC X-FUJINON 1: 1 2 f=50mm DM
(39) X-FUJINON 1:1 6 f=50mm DM
(40) 3EBC X-FUJINON 1:1 6 f=50mm DM
(41) EBC X-FUJINON M 1:3 5 f=55mm DM
(42) EBC X-FUJINON F 1: 2 8 f = 16mm DM
(43) EBC X-FUJINON SW 1:3 5 f=19mm DM
(44) EBC X-FUJINON W 1:2 8 f=24mm DM
(45) EBC X-FUJINON W 1:3.5 f=28mm DM
(46) EBC X-FUJINON W 1 :2 8 f=35mm DM
(47) EBC X-FUJINON T 1 :4.5 f=200mm DM
(48) EBC X-FUJINON T 1: 2 5 f = 135mm
DM
(49) EBC X-FUJINON T 1:3.5 f=135mm DM
(50) EBC X-FUJINON T 1:2 8 f=l00mm DM
(51) EBC X-FUJINON Z 1:4 5 f=85 - 225mm
DM
(52) EBC X-FUJINON Z 1 :4 5 f=75 -
150mm DM
(53)
X-FUJINON Z 1:3 5 - 4 5 f=43 - 75mm DM
(54)
X-FUJINON Z 1:3 5 - 4 2 f=29 - 47mm DM
(55) EBC X-FUJINON T 1 :4.5 f=400mm
This is used between the lens and camera body to
extend the lens for taking extreme close-ups and copying. The new Fujica Auto
Extension Tubes X25 and X50 are used separately and permit a magnification of
about 0.5X and 1X with a normal lens They are equipped for automatic aperture
setting and full-aperture metering to allow you to set the exposure with the
aperture wide open